Once the pressure from one chamber is equal to the spring pushing down, the piston moves back up and closes the plunger. This moving base type regulator reduces the pressure to a lower one to equalize both chambers. There are many different benefits from having a regulator, including:. In paintball, carbon dioxide CO2 has two different forms. The first is a condensed liquid that is in your paintball tanks.
The second is a gas that is used to shoot the paintball. The condensed CO2 in liquid form expands into the usable gas form. The carbon dioxide changing from a liquid to a gas is done in two different ways. The first is from an increase of an area, and the other way is by heat.
When a paintball tank is filled, it will leave a bit of a gap to allow the liquid to become a gas. For example, if you have a CO2 tank that is 25 oz ml , they will only fill it to 23 oz ml or even less to allow space for the liquid to change into a gas. Some CO2 tanks are even equipped with anti-siphoning equipment that reduces the potential for liquid CO2 to enter the marker.
The anti-siphon equipment is a tube that is installed in the valve of the tank that makes a turn towards the gas bubble when the CO2 container is mounted on the marker. This is because the CO2 tank is mounted horizontally on top of the markers. Additionally, heat can also play a big part in the transition of CO2 as a liquid to a gas form.
In that case, the rise in temperature will start to affect the liquid carbon dioxide in your tank. As it becomes hotter, the liquid will transform into a gas. High-pressure air regulators are devices used with a large number of paintball guns along with air tanks to make sure every shot you make delivers the results you expect.
It might sound strange to say, but small changes in pressure can drastically change the strength of each paintball your fire. With too much it can be a lot more forceful - even dangerous - while not enough pressure could see your shot fail to reach its mark.
Simply, high-pressure air regulators control the pressure in your paintball gun from the air source, usually an air tank, to ensure projectiles are launched correctly.
An air tank will have its own PSI rating, and regulators will lower these to a more suitable level for your model, usually between and PSI. Every product and paintball gun is different, so we advise doing plenty of research first to make sure you get the right air tanks and regulators to get the right pressures. There are different regulators out available, and while many work with a range of paintball guns, some are brand specific, model specific or purpose specific.
Before choosing or replacing an air regulator, check the details of your paintball gun and what it can support - as well as the air tanks that can be used with it. In most cases, the pressure should be equal from the air tank, through the regulator and within the paintball gun. At times, this can change - especially if the channel through the regulator is too small - however a valve will allow you to release any build-up.
Most often, this happens when shots are fired in quick succession with too small a channel. PSI is one of the most common ways of measuring pressure or stress, not just with air but in a number of areas. Anyone wanting to control the pressure at which their paintball gun operates needs a Regulator. There are also some advantages to operating at lower pressure, which requires a Regulator. A Regulator can also be used to help eliminate the erratic introduction of liquid Co2 into the system.
Paintball regulators work by using a valve that cuts off the air after pressure inside your paintball gun reaches a certain level within the regulator. Ultimately, controlling the air pressure results in more accuracy while shooting. Regulators are great if you are running either CO2 or Nitro. They are universal and only require that your marker has a standard vertical adapter or can accept a standard size valve thread into the receiver.
0コメント